top of page

Your Preferred Foundation Provider

ABOUT
20190105_080646.jpg
20190105_080646_edited.jpg

ABOUT US

Peck Brothers was setup in 1980 and incorporated in 1984 as a privated limited company. In the early years, it was mainly involved in the laying of water and gas utility mains for the then Public Utilities Board.

In 1991, the company ventured into foundation works on large crawler hydraulic hammer piling rigs, followed by jack-in precast RC pile and later diversified to driven steel micropile. In 2004, the trend of using jack-in-piles became increasingly popular and the company ventured into the design and fabrication of piling rigs. In keeping up with market trends and demands, the company introduced Bored Micropile system and other services including Pre-bore H-pile, Prebore Relief Well, Silent Steelpipe & H-pile and Mini-bore to expand our scope of capabilities. 

We are BCA registered contractor with piling workhead CR08 - grade L5, and obtained ISO 9001, ISO 14001 & ISO 45001, achieved piling specialist builder license & Biz Safe Star certifications.

Screenshot 2023-10-29 at 2.57.15 PM.png
Screenshot 2023-10-29 at 2.57.15 PM.png
Screenshot 2023-10-29 at 2.57_edited.jpg
Screenshot 2023-10-29 at 2.57.15 PM.png
Screenshot 2023-10-29 at 2.57.15 PM.png

PECK BROTHERS aspire to deliver Quality, Reliable & Safe piling solutions to our customers through Teamwork & Value-added services. Building our skills & Trust with our customers, we endeavour to continuously Innovate & Upgrade our skills & equipment to serve & propel our customers to greater Success.

Screenshot 2023-10-29 at 2.57.15 PM.png
Screenshot 2023-10-29 at 2.57.15 PM.png
Screenshot 2023-10-29 at 2.57.38 PM.png
Screenshot 2023-10-29 at 2.57.15 PM.png
Screenshot 2023-10-29 at 2.57.15 PM.png

PECK BROTHERS aims to grow sustainably in the arena of mini-piles. We strive to improve the quality of life & society by serving our clients with a range of lower-noise, less-disruptive piling related solutions. We endeavour to install each & every pile with integrity, serve one more happy customer, every time.

3

Piling Systems

L5

BCA Workhead CR08 Grade

WhatsApp Image 2023-11-02 at 15.20.02.jpeg

Biz Safe

Screenshot 2023-11-04 at 10.12.46 AM.png

Work-in-progress

OUR SERVICES

20180420_155358.jpg

Driven Steel Micropile

Agile & Efficient

20191115_165723_edited.png

Jack-In RC Pile

Silent & Vibration Free

PHOTO-2023-06-19-18-58-32.jpg

Bored Micropile

Proficient in all soil condition

IMG20200928163942.jpg

Jack-In Steel Pile

Silent & Vibration Free

Front (1).png

Prebore Hole

Alleviate & Ease

Kentledge Load Test.jpg

Load Tests

Quality Assurance

SERVICES
TECHNICAL

TECHNICAL

Driven Steel Micropile

Screenshot 2023-11-03 at 5.20.44 PM.png
  • Reinforced Concrete Pile (200mm or less)

  • Steel H-Pile (200mm or less)

  • Steel Pipe Pile

Jack-In Pile

20180425_172903_edited_edited.jpg
  • Reinforced Concrete Pile

  • Steel H-Pile / Steel Pipe Pile

  • Sheet Pile

Bored Micropile

20200930_111144_edited_edited_edited_edited.png
  • Drilling method (200mm to 350mm dia)

Prebore Hole

20191227_151405_edited_edited.png
  • Dry / Wet

  • Steel / PVC casing

  • Prebore H-pile

ATTC
DSCF1119_edited.jpg

APPROVED TRAINING & TESTING CENTRE
(ATTC)

Since July 2011,Peck Brothers has been comissioned by the BCA as one of its Approved Training and Testing Centre (ATTC). Read on to find out more on the costs and training structure below.

At Peck Brothers, we provide training and testing to candidates, with or without prior experience, in Jack-In Piling or Driven Piling Operations who wish to:

  • Obtain Skills Evaluation Certificates (Knowledge) SEC(K)

  • Register as CoreTrade Tradesman

  • Register as Multi-Skilled Personnel

CoreTrade is a worker's registration scheme, administrated by BCA, for building up a team of competent and experienced construction personnel in their respective trade that require them to undergo a Skills Assessment (SA) with Familiarization Course (FC). CoreTrade personnel are qualified as "Higher Skilled" R1 workers under MOM's Foreign Worker Levy Scheme.

Multi-skilling scheme, also known as Express Course for obtaining 2nd SEC(K), was introduced to offer an alternative pathway for respective industry to upgrade their experienced workers to "Higher Skilled" R1 construction work permit holder (WPH).

What we do

ATTC Training Benefits:

  • Enjoy Lower Levy - can save up to $4800 per pax per year.

  • Achieve 10% minimum R1 Work Permit proportion requirement.

  • Improve workforce productivity as worker gets more skilled and knowledgeable, which will help firms bettetter mnage their manpower cost and stay competitive.

  • Work Permit Holders able to work in Singapore up to 26 years.

  • Claiming for training & test fee under Workforce Training & Upgrading (WTU) scheme 

       (Up to 90% for Local/SPR)

Benefits

IMG_0741_edited.jpg

Upgrade Now

Operation

Jack-In Piling

WhatsApp Image 2021-03-12 at 11.12_edite

Upgrade Now

Driven Piling

Operation

CERTIFICATIONS

Biz Safe Star

Specialist Builder

OHSAS ISO

45001 2018

QMS ISO

14001 2015

EMS ISO

9001 2015

SCAL

CONTACT

CONTACT US

Training Centre

Peck Brothers Construction Pte Ltd

203 Kranji Road Singapore 739481

Contact Form

Thank You for Contacting Us!

Contact Us

For any inquiries, questions or recommendations, please contact us at:       

  T   6368 6288       

  F   6365 1928              

  Email: project@peckbros.com

 

                                                  

                   9756 6288

For ATTC inquiries, questions or feedback, please contact us at:       

  T   6362 2098       

  F   6362 6608           

  Email: training@peckbros.com

WhatsApp Image 2023-11-02 at 15.26.37.jpeg

Download
Brochure

bottom of page